Neuigkeiten

Compare single and double contact absorption in sulfuric acid production, including SO2 conversion, emission control, operating costs, and efficiency.

Learn how cooling, crushing, and screening after the Mannheim furnace improve potassium sulfate quality, control particle size, and reduce fines.

Learn how calcium chloride neutralization, pH control, impurity removal, and filtration help prevent evaporator fouling and improve production efficiency.

Compare FRP grating molds using target mesh and panel dimensions, release design, production interfaces and sample checks before requesting a machine quote.

Learn how to verify Mannheim SOP plant output, product quality and HCl recovery during commissioning, with practical acceptance records and test checks.

Specify an FRP pipe mould unloading station around mandrel size, alignment, pulling stages and a witnessed test before comparing winding line quotations.

Learn how to prevent scale in calcium chloride evaporators through feed control, impurity management, heat transfer optimization, and effective cleaning strategies.

Learn how to design an efficient HCl absorption system for a Mannheim SOP plant, covering gas load, heat control, water balance, materials, and operation.

Learn how to control acid mist in sulfuric acid towers through process optimization, demister selection, temperature control, and maintenance strategies.

  Corrosion-safe calcium chloride production begins with feed analysis, temperature control, material selection, and a maintenance plan that follows the actual chloride and acidity profile. A calcium chloride production line can include reaction, clarification, filtration, evaporation, drying, and granulation, but each section sees a different combination of chloride, water, heat, and solids. Why...

  The six critical corrosion zones in Mannheim SOP plants are the acid feed system, furnace reaction area, hydrochloric acid gas path, absorber, product cooling and dust system, and wastewater or drainage network. Each zone combines chloride, sulfuric acid, heat, moisture, or solids in a different way. A Mannheim process potassium sulfate production line needs a separate inspection and material...

  A low-dust fertilizer workshop is planned around where dust is created, how it moves, and how operators can clean equipment without sending settled material back into the air. For a Mannheim potassium sulfate plant, the workshop must connect KCl receiving, acid reaction, product cooling, screening, packing, and hydrogen chloride recovery. A potassium sulfate production line should therefore...